How To Connect Shark Robot To WiFi

When it comes to vacuuming, shark robot vacuum cleaners are handy, but how do you connect to Wifi to your new vacuum?

Shark robot vacuum cleaners have several functions you may use while linked to a WiFi, especially if your vacuum can connect to your home network.

Here is a tutorial to discover how to connect your shark robot to your WiFi and reset it when necessary.

Read Also: How To Change Spectranet SSID and WiFi Password

How to Connect a WiFi on Shark Robot

How To Connect Shark Robot To WiFi

Setting up your shark robot’s WiFi connection shouldn’t take long. This method works with all shark robot types, such as AI and ION.

  • A VPN or adblocker should be turned off before connecting your phone to the WiFi network you wish to utilize.
  • Reset the Wi-Fi settings if your robot vacuum has logged into a different network. The previous configurations are cleared, and pairing mode is activated for your robot.
  • You may also uninstall the Shark Robot vacuum from the app and reinstall it on the new network.
  • Choose your shark robot from the settings menu by tapping the menu icon to delete a robot.

The procedures for users of Android and iOS have been divided below:

How To Connect Shark Robot WiFi to iOS Devices

On your iOS Devices, such as iPhones and iPads, launch the Shark Clean application.

  • Create a user account. In essence, use your email and pick a strong password.
  • Activate the Wi-Fi on your robot.
  • Ensure the robot is switched on, then hold down the Dock and Clean or Dock and MAX buttons for the shark ION for 5 to 10 seconds until the Wi-Fi light blinks.
  • Choose robot. Go to the Wi-Fi settings after closing the app.
  • Go back to the Shark Clean app, choose your robot model from the drop-down menu, and then.
  • Enter the Wi-Fi password after choosing your network.
  • If you have access to more than one network, choose a 2.4 GHz network.

The Wi-Fi symbol on the robot transforms to a solid blue, and a success screen shows if your network connection is successful.

How To Connect Shark Robot WiFi To Your Android Devices

You may connect your shark robot to your network using the instructions below if you use an Android device.

  • On your phone, launch the Shark Clean application.
  • Create a user account. In essence, use your email and pick a strong password.
  • Activate the Wi-Fi on your robot.
  • Make sure the robot is switched on, then hold down the Dock and Clean or Dock and MAX buttons for the shark ION for 5 to 10 seconds straight until the Wi-Fi light starts blinking.
  • Enter the Wi-Fi password after choosing your network.
  • If you have access to more than one network, choose a 2.4 GHz network.
  • The Wi-Fi symbol on the robot transforms to a solid blue, and a success screen shows if your network connection is successful.

Instructions to name and register your shark vacuum robot appear when you connect to your WiFi.

To automatically register your robot’s model and serial number, scan the QR code on the
bottom of the device.

NOTE: Different models have different combinations for the WiFi reset buttons. If one combination doesn’t work, try another.

Once your shark robot has established a connection to your Wi-Fi network, you can set up voice control with Google Home or Amazon Alexa.

Check out our Shark robot connectivity troubleshooting guide if you have issues connecting your vacuum to your network.

How to Change the Shark Robot’s WiFi Network Password

Changing the WiFi network Password to which your Shark robot is logged in might be difficult. It differs from a mobile phone, where you can search for a different network and connect.

Here, we have the tried-and-true methods to assist you in finishing this in a short period. So, how can your Shark Robot vacuum’s WiFi network be changed?

  • Get your WiFi password before making the change.
  • Then, be ready to start the procedure by setting up your Shark Robot vacuum and network.
    Ensure that 2.4GHz is turned on.
  • Next, remove your vacuum from the app and add it back.
  • You may then set it up again and choose a fresh WiFi network for your vacuum to connect to.

Where to Find the Default WiFi Password

  • Grab your router and turn it over.
  • Look for the package sticker that contains the default information for your router.
  • On the sticker, you may find the default SSID password.
  • So that you may utilize it later, write it down.

Remember to check for the password that states SSID password rather than admin password on your router’s package label, which may have two passwords.

Read Also: 5 Easy Steps To Connect Your Laptop To Your Phone

Why Upgrade Your Shark Robotic Vacuum’s WiFi Network?

The Shark Robot vacuum must be linked to the Internet for optimum operation. It can still do full-home and spot clean-ups without WiFi, but doing so makes it possible to use advanced functionalities.

You might need to switch the WiFi network on your Shark Robot vacuum for the following reasons:

  1. Connection Issues
  2. Your Network has malware
  3. Robot is unable to connect to the network
  4. Unresponsive App

Frequently Asked Questions

Does The Shark Ion Robot Require WiFi?

Wi-Fi is not always required to use the Shark Ion robot to vacuum. But if your shark robot isn’t linked to Wi-Fi, you miss out on several things.

These characteristics include;

  • Control your shark robot from a distance. You may pause, resume, or start cleaning jobs via the app while your shark robot is connected to your network.
  • Making personalized schedules. You can program cleaning cycles for your shark robot.
  • View the history of your robot. A connected shark robot can get thorough reports on the robot’s operations.
  • Your robot tasks’ 30-day history may be found on the history page.

Modifying cleaning efficiency. With a connect shark robot, you can quickly change the suction force needed to clean different surfaces efficiently.

How Can My Shark Ion Robot WiFi Be Reset?

These procedures should be followed to establish a new connection to your shark ion robot:

  1. Reset your Wi-Fi router by unplugging the power cord, waiting 60 seconds, and replugging it.
  2. Start your shark robot again by turning off the power and waiting 20 seconds before turning it back on.
  3. Restart your phone – This should be easy. Start your smartphone again and wait for the procedure to finish.
  4. You can start connecting again by doing these three actions. Now that your shark robot is connected to Wi-Fi, you may utilize the Shark Robot Clean App and the instructions above.
  5. You must now do a factory reset and reset the configuration
    to the default to remove the shark robot’s connection history.

How to reset the factory settings on your Shark robotic vacuum;

  • Activate the Shark Clean app.
  • Visit the settings page.
  • Choose the Factory Reset option.

The factory reset will start on the shark robot and may take a few minutes. The shark robot vacuum will then be reset to factory settings with all data deleted.

You must reboot your device when the robot is removed from the app.

Read Also: The 5 Steps To Connecting Your WiFi Network To Your Android Laptop

To Sum Up

You now understand how to modify the Shark robot’s WiFi network. It’s not as difficult as you imagine. You can set everything up in minutes since the procedures are clear and straightforward.

Also, restarting the robot and your network might improve the connection if you experience any network troubles.

However, if you experience difficulties logging onto your WiFi network, you may contact Shark customer service.

RELATED POST

Android 12 Hidden Features you Didn’t Know About – See them Below
Troubleshooting – How To Fix ” There was an Error Generating Response On CHATGPT “
Smile Generation Login – What it is and How to Create an Account
How To Update Firmware Version Of Your Airpods
12 Things You Should Stop Doing On your Android Phone

Leave a Comment